Windshield Washer Nozzle Repair Kit compatible with Kia Sorento Optima Soul Sportage Rio Sedona Niro 2001-2023, Hyundai - Adjustable wiper Jet Sprayers 98630-2K100 98630-3J000, Click&Fit

Windshield Washer Nozzle - aftermarket replacement Set including all you need for replacement: 2 pcs WS Spray Nozzle 2 pieces of water Check Valve 6.5 feet Washer Fluid Hose 6 Connectors. This is an aftermarket part that replaces OEM part numbers: 98630-2K100, 98630-3J000, 98630-YY000, 98630-3X000, 98630-1R100, 98630-1R800, 98630-3K500, 98630-2B000, 98630-26600, 98630-38001, 98630-3S000, 98630-4L000 plus the YY000 supersession variants. This is an aftermarket washer nozzle, not a genuine part. Compatible with Kia Models: Sorento 2003-2023 Optima 2001-2020 Rio 2001-2023 Soul 2008-2019 Compatible with Kia Sportage 2011-2021 Sedona 2015-2021 Niro 2016-2021 Cadenza 2017-2020 Amanti 2004-2010 Carens 2012-2022 Venga 2009-2019 Ceed 2012-2018 Borrego 2009-2011 K900 2019-2020 Compatible with Hyundai Models: Sonata 2002-2014 Elantra 2001-2020 Santa Fe 2001-2019 Tiburon 2000-2008 Azera 2006-2017 Veracruz 2007-2012 Equus 2010-2016 Ioniq 2017-2022 Accent 2006-2017 Kona 2018-2022 i20 2008-2020 i30 2012-2018 i40 2011-2020 ix20 2010-2019 Genesis 2009-2016 Genesis Coupe 2010-2016 Tucson 2015-2021 Creta 2010-2020 May Also Fit (Verify Before Ordering): The following vehicles share the same snap-in nozzle mount and likely accept this part. Compare your existing part side-by-side or check by VIN before purchasing. May also Compatible with Kia: Sedona 2002-2014 - GQ / VQ snap-in mount Forte 2000-2018 - SD / TD / YD snap-in mount May also Compatible with Hyundai: Sonata 2015-2019 - LF generation, 2K100 mount Tucson 2010-2015 - LM generation, 2K100 mount XG350 2001-2011 - XG / TG, YY000 mount Product Details: Snap-in wedge head approximately 16-17 mm (0.63-0.67 in) wide x 10-11 mm (0.39-0.43 in) tall, body length approximately 22-24 mm (0.87-0.94 in), straight in-line fir-tree barb approximately 4-4.5 mm (0.16-0.18 in) outer diameter for a 3 mm (0.12 in) inner-diameter hose. Retention by two flexible squeeze-wing clips that spring out behind a thin-panel aperture. Adjustable brass jet, non-heated, sold as a left and right pair. Finish: black (matte/satin). When to Replace: Common signs of a failed washer nozzle include weak, misaligned, or clogged spray, fluid dribbling instead of spraying, or a cracked or broken nozzle body. A nozzle that no longer clips firmly into its seat or sprays onto the hood instead of the glass is also due for replacement. Installation: This is a snap-in nozzle held by two squeeze-wing clips: the wedge head is pressed into the panel aperture until the wings spring out and latch behind it, and the supply hose pushes onto the straight barb underneath. On cowl or scuttle-mounted applications the nozzle sits in the trim channel at the base of the windscreen below the wiper arms, so the scuttle cover or wiper arms may need to be lifted for access. The straight in-line barb suits these cowl locations and many hood locations, but not applications where the original nozzle's hose turns sideways. Important Notes: Verify your existing nozzle's mounting seat and barb direction match before ordering. This is a straight in-line barb and will not route correctly where the original nozzle's hose exits sideways. Fitment is set by the mounting envelope, not by jet design: 1, 2, and 3-way orifices, brass or plastic, and adjustable or fan jets all share the same snap-in seat. On vehicles originally fitted with heated washer jets, this non-heated nozzle fits the same mount but will not retain the factory heating function. Retention depends on the squeeze-wing clips seating behind the panel. If the original rubber grommet is thick it may need to be omitted or trimmed for the clip edge to latch, and each side's spray aims independently and adjusts with a pin.

• Snap-in wedge head approximately 16-17 mm (0.63-0.67 in) wide with a 4-4.5 mm (0.16-0.18 in) straight in-line barb that drops straight down, verify your existing nozzle's mounting seat and straight barb direction before ordering.
• Replaces OEM part numbers 98630-2K100, 98630-3J000, 98630-YY000, 98630-3X000, 98630-1R100, 98630-3K500, 98630-2B000, 98630-26600, 98630-4L000 plus superseded variants. This is an aftermarket washer nozzle, not a genuine part.
• Compatible with Kia: Optima 2001-2020, Rio 2001-2023, Soul 2008-2019, Niro 2016-2021, Cadenza 2017-2020.
• Compatible with Kia: Sorento 2003-2023. Compatible with Kia Sportage 2011-2021, Sedona 2015-2021.
• Sold as a Repair kit with 2 pcs WS Spray Nozzles, 2 pieces of water Check Valves, 6.5 feet Washer Fluid Hose, 6 Connectors.